For the guy's !

[herbgrower]

Since i have been here i have figured that most of us either are of working class background or have something to do with the land. :thumbsup:

I have found a "miracle" cure for rusty tool's !!! :eek:

Brown vinegar ! :thumbsup:

I have used this stuff to get an engine to turn that was completely rusted,that did take a week tho,but saved me buying a new block ! :D

For tool's depending on how big they are,i usually use an old ice-cream container,put ya rusty tool's in and leave over night. :cool2:

In the morning you will have to give them a bit of a clean,but you will notice an immediate difference. :thumbsup:

Another natural cleaner i was told about but have not used is Molasses(sp),apparently it does an even better job at de-rusting,but i think that you would need a guerney to clean the part's once removed from the molasses. :eek:

If i have been un-clear in what i have said,um ask q's and i will do my best to answer them for ya's ! :thumbsup:

:animbong:

[Scorpion_King]

i have always used WD-40 to break rust

[herbgrower]

WD-40 wasn't worth a squirt of piss when trying to un-seize a three cylinder tractor block ! :thumbsup:
After a week of soaking and replacing the vinegar,i got the motor to finally turn over. :cool2:
:animbong:

http://www.420-genetics.com/images/e1.jpg

http://www.420-genetics.com/images/e2.jpg

http://www.420-genetics.com/images/e3.jpg

I did use WD-40 at first to try to lubricate the inside of the block by removing the injector's and spraying down the hole,that is what i ended up with!!!! :eek:
Different coloured water ! :thumbsup:
The second pic is about 3 day's into it.After soaking and sopping up the excees vinegar and replacing with fresh stuff. :cool2:
The last pic is what vinegar does for a motor ! :thumbsup:
:animbong:

[stevesarich]

Works great for feminine hygene as well! :D :eek: :p

[herbgrower]

Forgot about that Steve!!!! :D
:animbong:

[stevesarich]

Forgot about that Steve!!!! :D
:animbong:

Just don't try recycling....in either direction. :bongdude:

[herbgrower]

:thumbsup:
No problemo! :D
:animbong:

[Scorpion_King]

my bad, i ment to say i always use WD-40 to break the rust of my tools.
i try to stay away from autos, never was good at puzzles

[herbgrower]

My bad too ! :o
Um,after i got the 10 litre's of water out of the sump,it was then that i realised i had a slightly bigger problem than what i had iniatally thought ! :eek:
The father in law had a "mechanic" work on the tractor,pulled it to piece's,fucked up a lot of component's,starter motor etc,plus they left the manifold uncovered so consequently water filled the block. :mad:
So,i tried using a crack bar with a 2 foot extension pipe attached to that,putting about 1/4 of a tonne's worth of pressure on it,and the motor still would not turn ! :mad:
Took the head off and went;"Oh fucking JOY!!!!!!" :eek:
Was looking at having to buy a new block,which i didn't the money for,went to a spare part's place and an older fella told me about the vinegar.
I thought he was genuinely pulling my leg,but i thought i got nothing to lose and everything to gain,so i went for it,didn't realy expect any great result's,but was more than impressed with how it turned out ! :thumbsup:
I am not a mechanic,have done a basic mechanic's course,like stage 1 or something like that,BUT,ya gotta have the CORRECT manual's and tool's also help when doing shit like this. :thumbsup:

Um,as far as soaking ya tool's,wot i meant was if they are rusted completely and u cannot possibly use them,just soak them over-night,then rinse then spray with the WD-40,they wil last forever,i have used this on trimming shear's,old plier's,& side cutter's,nut's and bolt's too,but ya gotta get the oil onto them as soon as possible to stop the rust returning. :thumbsup:
Hope that has helped clarify what i was on about ! :D
:animbong:

[Tiberon]

HG....good info bro......goooooood info :thumbsup:
Also If ya have a rusty tool that dont work to well...let it sit oil overnight. Same concept as yours i suppose....yours is actually mo cheap probably. :smokin3:

I heard that coca-cola does wonders too for eatin rust....anyone heard that?

[herbgrower]

I have heard that,but i think it would be more like the "pure" concentrate that they use b4 processing into Coca-Cola.
Over here,the truck's that deliver the concentrate have to be labelled with a "toxic" warning on them,in case they have an accident,the stuff is like acid. :eek:

And u r correct about the vinegar being cheap ! :D
One can of WD-40 $5.95,two bottle's of 2litre's of vinegar,$3.60 !!! :smokin3:
:animbong: